The role provides manufacturing engineering support across process validation, production issue resolution, engineering changes, controlled documentation, training, and continuous improvement.</p><br /><p>This position reports to the Director, Project & Engineering and is part of the Process Engineering team located in Singapore and will be an on-site role.</p><br /><p><b>In this role, you will have the opportunity to:</b></p><ul><li>Improve medical device manufacturing performance by monitoring First Pass Yield, process capability, productivity, Material Review Board trends, and recurring production issues, then implementing sustainable corrective and preventive actions.</li><li>Provide day-to-day process and product engineering support following new product design transfer, including troubleshooting, containment, root-cause analysis, complaint investigation, and resolution of manufacturing and product issues.</li><li>Plan, execute, document, and maintain qualification and validation of manufacturing processes, tools, fixtures, and equipment, including preventive maintenance requirements and process requalification.</li><li>Coordinate engineering changes and maintain production readiness across controlled documents, materials, tooling, training, SAP data, process risk assessments, control plans, routings, and work instructions.</li><li>Develop and sustain standard work and manufacturing playbooks using Lean and Danaher Business System tools, while supporting supplier qualification, first article testing, audits, inspection readiness, and compliance improvement activities.</li></ul><br /><p><b>The essential requirements of the job include:</b></p><ul><li>Bachelor's degree in Mechatronics, Electrical, Electronics, Industrial, Production, Mechanical Engineering, or a related engineering discipline.</li><li>Minimum 5 years of related experience in a Lean manufacturing or production environment, including at least 3 years in medical device manufacturing.</li><li>Knowledge of medical device quality and regulatory requirements, including ISO 13485 and Medical Device Single Audit Program requirements.</li><li>Experience with manufacturing process validation, jig and fixture design, Failure Mode and Effects Analysis, Design of Experiments, and structured root-cause problem solving.</li><li>Working knowledge of SAP and controlled manufacturing documentation, such as process risk assessments, control plans, routings, inspection instructions, and production work instructions.</li></ul><p><b> </b></p><p><b>It would be a plus if you also possess previous experience in:</b></p><ul><li>Supporting audits, inspection readiness, remediation activities, and Device History Record accuracy in a regulated manufacturing environment.</li><li>Leading complaint, warranty, corrective and preventive action, or supplier quality investigations through failure analysis and corrective-action implementation.</li><li>Delivering production training and deploying Lean or Danaher Business System standard work across assembly operations.</li></ul><p> </p><p>Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it is a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info.<br /></p><p>#LI-onsite #LI-VH1</p><p><span>Join our winning team today. ...
This role supports Quality Management Systems (QMS), Environmental Health & Safety (EHS) programs, and facilities-related compliance requirements.</p><p></p><p>This position reports to the <b>Head of EHS & Facilities (APJ)</b> and is part of the EHS & Facilities team located in 15 Tukang Innovation Drive, Singapore 618299 and will be an on-site role.</p><p></p><p><b>In this role, you will have the opportunity to:</b></p><ul><li><span>Lead Facilities Management operations including maintenance, utilities, security, contractor management, and controlled environments to support business continuity and operational excellence.</span></li><li><span><b>Support </b>facilities-related Quality Management System (QMS) activities including change control, CAPA, deviations, risk assessments, validation documentation, qualification activities, and audit readiness</span></li><li><span><b>Monitor and maintain</b> facilities infrastructure including ACMV systems, cleanrooms, compressed air systems, electrical distribution, fire protection systems, Building Management Systems (BMS), CCTV, card access systems, and emergency power systems.</span></li><li><span><b>Support</b> facilities projects, infrastructure upgrades, equipment relocations, shutdown planning, and continuous improvement initiatives through effective coordination, documentation, and stakeholder communication.</span></li><li><span>Monitor facilities performance metrics and support initiatives related to energy efficiency, sustainability, maintenance effectiveness, contractor performance, and operational reliability</span></li></ul><p></p><p><b>The essential requirements of the job include:</b></p><ul><li>Degree in Facilities Management, Mechanical Engineering, Electrical Engineering, Civil Engineering, or a related Engineering discipline with relevant Facilities Management experience.</li><li>Experience supporting Facilities operations within a regulated manufacturing environment such as Medical Devices, Life Sciences, Pharmaceuticals, Semiconductor, Precision Engineering, or Electronics Manufacturing.</li><li>Strong knowledge of Facilities Management systems and infrastructure including BMS, ACMV systems, electrical distribution, fire protection systems, card access systems, and utilities management</li><li>Experience supporting audits, CAPA investigations, change control processes, validation, qualification, and risk assessment activities</li><li>Familiarity with Singapore regulatory requirements and authorities including BCA, PUB, NEA, SCDF, MOM, and SPF.</li></ul><p></p><p><b>It would be a plus if you also possess previous experience in:</b></p><ul><li>Certification as a Fire Safety Manager (FSM) with SCDF</li></ul><p></p><p>Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info.</p><p><span>Join our winning team today. ...
The successful applicant for this position will be joining the Manufacturing team located in Sanofi EVF, Tuas Singapore. The purpose of this role is to provide technical expertise for upstream/downstream processes areas in various activities like shopfloor support for process equipment troubleshooting activities and investigation during Manufacturing. The role will report to theSenior Manufacturing Support Manager, Manufacturing. ...
The Associate Engineer, Manufacturing – Downstream (Process) supports day-to-day downstream manufacturing operations by ensuring that downstream processes (e.g, seed train, cell culture, bioreactor operations, multi-column chromatography, viral inactivation) are executed consistently, within defined process parameters, and in compliance with GMP requirements. The role operates within a defined process scope and supports Manufacturing Operations by monitoring process performance, analyzing trends, supporting investigations, and contributing to continuous improvement of downstream process robustness. As required, the role may support New Product Introduction (NPI), process startup, and validation activities, primarily from an execution, monitoring, and documentation standpoint. ...
The HVDC sites are located in Germany and Netherlands as well as in Singapore, Dubai and Batam for the platform construction.. Mission DescriptionLiaise with design office and PM team for timely issuance of data required for preparation of commissioning site works (specs, designs, BOQ, material lists, …)Prepare and maintain commissioning documentation, including ITPs, checklists, test procedures, and reports.Perform and support functional testing of Control & Protection, SCADA, HMI, Automation and Telecom systems including secondary equipment and interfaces within substations and switchyards.Follow up, be the point of contact and assist in testing and commissioning done by 3rd parties under C&P relevant scope.Publish test reports and follow up completion of relevant quality documentation. Complying with the contract requirements and the project Quality PlanMonitor, record, and report progress of commissioning activities on site.Ensure all C&P testing and commissioning activities are carried out in compliance with safety requirements, quality standards, and applicable regulations.Maintain effective communication with customers, contractors, and internal stakeholders during site execution.How You’ll Make an ImpactYou will contribute directly to the Energy Transition by helping deliver AC, FACTS, and HVDC projects successfully to our customers.You will support the commissioning of critical Control & Protection systems that enable safe and reliable operation of substations and power transmission infrastructure.You will develop your technical expertise through hands-on experience with state-of-the-art grid technologies and site-based project execution.What You BringCompleted degree in electrical engineering, energy technology, or a comparable qualification.Sifnificant knowledge and experience in commissioning of substation components such as protection relays, HV substation control systems, SCADA, HMI, and telecommunication structure.Understanding of electrical schematics, wiring diagrams, interlocking logic and communication schemesFluent in English; additional language skills are a plus.Willingness to work on construction sites in Germany and abroad, and optional assignments on offshore platforms.German driver's license class BYour opportunities for personal growthDevelopment as Senior Commissioning Engineer and Commissioning ManagerDevelopment as Technical ExpertDevelopment in Project ManagementWhy we come to work:At GE Vernova, our employees are always up for the challenge - and we’re always driven to find the best solution. ...
In this case you will be responsible for the Thai market. Main responsibilities Manages the customer portfolio: smooth running of orders, maintenance and development of commercial relationships, ensures visits.Ensures compliance with contractual clauses, the good quality of the service provided or the equipment sold and customer satisfaction.Contributes to the growth of turnover in its sector by exploiting data from the installed base: implementation of framework contracts, retrofit proposals, training.Develops commercial offers based on service FAE costings for complex consultations (retrofit, system replacement, etc.).Performs costing for simple consultations (spare parts, training, etc.) in coordination with the service costing manager.Ensures the updating of its pipeline: status of opportunities, customer accounts and all related parameters in the appropriate tools (CRM, S4H, TOL).Takes part, with the Service sales manager, in the consolidation over 3 rolling months of the order intake forecast.Distributes all required documents and information (OEF, customer order, offer, costing) to the ADV department for recording orders upon receipt. Qualifications and Requirements Ideally Electrical, Electronical Engineer or similar.5 to 10 years of experience in customer account management and technical sales activities.Good knowledge of secure power supplies such as chargers and inverters.Mastery of tools and information systems (CRM, costing tools, ERP).Good level of English, read, written and spoken.Full-time permanent contract.Customer visits: 50 to 70% of the time.Apply nowImprintPrivacy PolicyMachine-readable job feed (JSON)powered by softgarden ...
It connects the process development, system development and machine safety teams on one side, with the software development, electrical, and pneumatic design teams on the other. Main responsibilities include: Driving the identification and consolidation of requirements for the Machine ControlSystem of Nikon SLM machines and peripheral devices Development of overall control system architectural and functional concepts toimplement and flow down previously identified requirements on system andsubsystem level Strong communication and coordination with internal control system design team in Lübeck and other internal company stakeholders in the development of individual subsystem concepts for the Machine Control System Drive the definition of Machine Control System I/O and interfaces (mechanical, logical,electrical) within the system and with external systems Coordination with the Software Development team in implementing concepts inSoftware, Control System Logics and Algorithms to realize design requirements Advisory support for testing and commissioning systems, as well as service supportboth internally and externally for the customer Support analysis, rectification and adjustments of systems Contributing to assess customer needs, technology trends and definition of ControlSystem Product strategy QUALIFICATIONS AND REQUIREMENTS: Bachelor's or Master's degree in the field of engineering (mechanical, electrical,aerospace), automation technology or comparable Minimum of 5 years professional post-university experience within industrial automation and application control Experience with system design of complex control systems in the industrial machinery manufacturing sector Knowledge of electrical engineering, understanding of wiring diagrams as well assoftware development Organizational and coordination skills, including organizing technical meetings andoverseeing the status on deliverables Ability to effectively communicate complex technical content and drive decisions Knowledge of programmable logic controllers and their programming languages isadvantageous Empathetic team player and ability to work in a rapidly evolving environment YOUR NEW WORKPLACE: We offer you a versatile and responsible scope of duties in a global business. You can expect colleagues on an equal footing, flat hierarchies, a strong team spirit and a "can do" working atmosphere.We like to describe ourselves as a company with a start-up atmosphere, because with us you get the best of both worlds: a dynamic, future-oriented work environment with the advantages of a corporation.We are a company of diversity, tolerance and openness. ...
This role combines hands-on operational support with the opportunity to drive automation and continuous improvement across a modern, large-scale networking environment. Start: Mid October Duration: 3 years contract Location: Basel & hybrid - up to 50% - candidates must be based in Switzerland, even for the remote work You will work with a range of advanced networking technologies — including Cisco SDA, ACI, Infoblox, Checkmk, Palo Alto, and F5 — ensuring the scalability, reliability, and security of critical infrastructure. Tasks: Provide operational support for enterprise networking systems, ensuring seamless daily operations. ...
Aufgabenfelder: • Verantwortlich für die Planung, dem Betrieb und der Weiterentwicklung der zentrale IT- und Cloud Infrastruktur • Administration und Monitoring von sicheren, skalierbaren und zuverlässigen Hybrid-Cloud Lösungen • Sicherstellung des Cloud-Betriebs durch regelmäßige Wartung und Updates aller Systeme und deren Dokumentation • Installation und Konfiguration neuer Cloud Komponenten wie VMs, Storages und Datenbanken, Deployment von XaaS Komponenten in unserem Private & Public Cloud Environment • Verantwortlich für die Planung und Durchführung von IT-Projekten im Rahmen der IT-Infrastruktur Cloud Roadmap • Initiieren, Erarbeiten und Nachverfolgen von nachhaltigen Maßnahmen zur kontinuierlichen Verbesserung der Cloud-Infrastruktur, der Prozessabläufe und zum Einsatz neuer Technologien • Konzeptionierung, Organisation und Durchführung von Workshops und Trainings • Direkte Berichtslinie an den Global Director IT Infrastructure der Kunden Gruppe Sie bringen mit: • Abgeschlossenes Studium im Bereich Informatik oder eine vergleichbare IT-Ausbildung mit mehrjähriger Berufserfahrung • Mindestens 5 Jahre Berufserfahrung im IT-Cloud Umfeld (Microsoft Azure) • Erste Erfahrung im Aufbau und dem Betrieb von Hybrid-Cloud-Infrastrukturen • Erfahrung in der Leitung von IT Projekten • Mehrjährige Erfahrung in der Steuerung externer Dienstleister • Ausgeprägte Service-Orientierung, offene Kommunikation, selbständige und proaktive Arbeitsweise sowie Kreativität in der Lösungsfindung • Hohes analytisches Denkvermögen, prozessuale Denkweise sowie Teamgeist • Verhandlungssichere Deutsch- und fließende Englischkenntnisse • Reisebereitschaft Wir freuen uns auf Ihre Rückmeldung ! ...